Survey report (PDF)
The Survey report is a PDF produced with one click from the project detail panel. Hand it to your client or archive it. It collects the project’s key data and outputs — only the layers that exist in the project are included.
What’s inside?
Section titled “What’s inside?”The report is A4 and typically 4–7 pages long. Sections are numbered continuously; sections without data are skipped.
Page 1 — Header and flight secure zone
Section titled “Page 1 — Header and flight secure zone”- DroneField logo, SURVEY REPORT title, project name and date
- CUSTOMER NAME, REGION, FIELD ID (the project name)
- Drone (make, model, serial number) and Use RTK (Yes / No, with average accuracy)
- Take Off, Landing, Total flight time (estimated from the image timestamps)
- Flight Altitude (AGL), Number of photos, GSD
- 1. Flight secure zone — a map snapshot with the flight route and the safety buffer around it (buffer radius = flight altitude, the 1:1 rule)
2. RGB Ortho mosaic
Section titled “2. RGB Ortho mosaic”The finished orthomosaic on a full page. The page turns to landscape automatically when the field shape fits better that way.
3. DSM
Section titled “3. DSM”The colour-coded surface model with its Max / Min elevation next to the image.
Boundaries (if any)
Section titled “Boundaries (if any)”Every field boundary listed with its area, the Selected areas total, and the orthomosaic with the boundaries drawn on it. Obstacles and no-spray zones are not listed.
Vegetation index (if any)
Section titled “Vegetation index (if any)”The active index map — the title carries its name, e.g. NDRE (range −1.0 … +1.0). The report always renders the full −1 … +1 range with a colour legend, regardless of the display range you set on the map.
Application map (if any)
Section titled “Application map (if any)”Two pages:
- Application — Application Map — the Grid size, the Min. valid share, one row per zone (dose per hectare and area) and a Summary line (total amount and total area).
- Application plan — the application grid drawn in zone colours on top of the orthomosaic, on a full page.
How to generate
Section titled “How to generate”- Open the processed project. The button only appears once the orthomosaic exists.
- In the project detail panel, click Report generation.
- A Save survey report dialog opens. The default file name is
<project>_survey.pdf; pick a folder. - Click Save. The button shows Generating… while the PDF is built.
- When done, ✓ Saved appears under the button and Finder opens with the PDF selected.
Open the PDF in Preview, Adobe Acrobat or any reader.
PDF properties
Section titled “PDF properties”- Size: A4 (portrait; full-page image pages may be landscape), ~4–7 pages
- Images: JPEG-compressed, so the file stays small enough to email
- Language: follows the app language
- Customer and region — fill these in on the project; they appear in the header (otherwise ”—”).
- Vegetation index — select the index you want in the report on the map before generating; the report uses the active one.
- Application map — the report uses the application map stored with the project, even if the panel is not open.